Seistronix Exploration Seismographs - Home

 

Seistronix TL-300 Specifications

TL-300 LOGGER
Number of sensors: 4 to 300
Sample Rate: Menu selectable: 5S, 30S, 1M, 2M, 5M, 10M, 15M, 30M, 1H.
Programmable from 5 seconds to 23 hours per sample
Minimum Sample Time: 1.5 seconds for 60 sensors. 7.5 seconds for 300 sensors
A/D Resolution: 10 bits
Memory: 96K bytes. Stores 1,310 samples from a 60 sensor cable (655 samples for two cables]
Data input: Multiplexed temperature dependent current sources.
Data output: RS-232, printer, or direct readout on Liquid Crystal Display (LCD)
Signal Conditioning: 50/60 Hz selection. Averaging over 1,2 or 4 cycles of the line frequency.
Power: 6 "D" cells. Alkaline cells provide 20,000 readings at 25 C ambient.
Enclosure: Electronics are housed in a reinforced plastic waterproof case with a clear watertight lid
Size: 5.5 x 6 x 11 inches
Weight: 3.5 lbs with batteries
Temperature: Operating 0 to 50 C, Storage -20 to 60 C
Humidity: 100% Waterproof

 

TL-300 CABLE
Number of sensors: 60 per section
Cable length: First cable: 118' plus 1' connector lead-in.
Intermediate cables: 118' with 1' lead-in on both ends.
Sensors are labeled at 2' intervals (0,2,4...118).
Sensor Diameter: 9/16 inch
Cable Diameter: 3/16 inch
Connector Diameter: 1-1/8 inch
Cable Length Tolerance: +/- 0.1 foot
Maximum Operating Temperature: 105 C
Weight: 5 lbs.
Size: 5.5 x 6 x 11 inches
Weight: 3.5 lbs with batteries


Seistronix reserves the right to changes specifications

Phone: (916) 851-1890 Fax: 916-851-1852 Email: sales@seistronix.com